from the doc: DOSRDP 1.09 The Terminal Services Client for DOS.DOSRDP is a Terminal Services Client for DOS. use it you can make fast and low cost Windows-based Terminal architecture.or remote control a windows 2000 server in a floppy boot disk .Run a DOSRDP,What machine i need? 486 or up DOS environment(MSDOS6.X or WIN95/98/ME/XP MSDOS BOOT),and the himem.sys should be load. Floppy disk or remote boot if had not a hardisk. Vesa support card(VESA TSR needed if a special old card) Mouse and mouse driver Network card with packet driver. What is a Packet driver, How to get it? packet driver is a common driver for network card under dos. The DOSRDP use packet driver.We have included a couple of packet drivers with the install package, For some other NICs you can try: ftp://ftp.crynwr.com/drivers/00index.html or download the packet driver for your NIC from the manufacturer website. at http://www.nu2.nu/ you can download a network boot floppy disk maker, it support 93 network card. How to install a network card packet driver by manual. After get your network card packet driver,you need install it in the run.bat to make it run. If you did not select a network card in the setup.exe you need modify run.bat by manual. like this.--> RUN.BATMOUSEYOUR NIC PACKET DRIVERG2Run it under Netware or Microsoft MSDOS Network Client It need a shim over a odi driver or ndis driver to get the packet interface,You need read the use usenovell.txt or usendis.txt to make DOSRDP run at ODI or NDIS network card driver. bug list and fixed1.09 - Add auto login function username/password can set in setup.exe1.08 - Add the multi user configure (by mac address)1.07 - Add the vesa 3.0 support - Add the hostname seting1.06 - Add the keyboard layout set - Fixed some keyboard bug1.05 - Fixed many issues with ATI Video Cards. That cr** card should work now. :-) - Support for NDIS! If you have boot disks already in place working with NDIS drivers, read the NDIS.TXT file under the NDIS directory.1.04 - Support for Modem connections. Included you will find a PPP dialer and a packet driver that you can use over modem connections! - VESA support included. Many people reported the client does not work. Well it works. The issue is that on many computers, specially the older ones, the video card does not support any VESA modes. To fix this, load UNIVBE or UNIVESA before launching G2DEMO. You can change the autoexec.bat file as explained below. - New mouse driver provided (CTMOUSE.EXE).1.03 - Fixed the issue with the mouse working in the upper left corner only. On the TCP.CFG file, you need to set mouse=logitech (default) or mouse=ms.1.02 - Fixed problem when exiting. - Fixed some issues with a couple video cards.